Regrouting a Shower: Tips to Prevent Leaks and Expectations

Have you observed water accumulating on the bathroom floor outside your shower? The grout lines might look cracked or stained, and a persistent musty odour hangs in the air despite your thorough cleaning attempts. You may have noticed the paint on the adjacent wall beginning to bubble or the timber door frame near the shower swelling due to excessive moisture.

It’s common to jump to the conclusion that a pipe has burst behind the wall. in many cases, water seeps through damaged grout and degraded silicone. A straightforward regrouting and resealing can effectively halt that leak without needing to remove a single tile.

This guide outlines when regrouting your shower can be an effective solution for a leak and when it may fall short. You’ll also discover what the regrouting process involves when you choose to collaborate with Leaking Showers Sealed, including how long you should refrain from using the shower afterward. If you already suspect that the grout is the root of the problem, our dedicated shower regrouting page offers a comprehensive overview of our regrouting services in North Richmond, the Hills District, and the North Shore.

Can Regrouting Effectively Fix My Shower Leak?

• Regrouting can successfully stop leaks when water escapes through damaged grout or silicone.
• We remove the old grout and replace it with Ardex EG15 epoxy grout, a non-porous material, and reseal corners and junctions using Ardex neutral cure silicone.
• Your tiles remain intact, allowing you to address a leaking shower without the hassle of extensive renovations or tile removal.
• If the leak is traced back to a faulty pipe, drain, or tap, you will need to consult a plumber. A compromised membrane beneath the tiles will require tile removal, meaning a regrout alone will not resolve these issues.
• It’s advised to wait at least 24 hours before using the shower again.

Reach out to Leaking Showers Sealed if you have noticed mouldy grout, a damp smell, or water leaking around your shower.

Understanding Shower Regrouting and Its Importance

Shower regrouting entails removing old, cracked, or mouldy grout from between your shower tiles and applying new grout to restore the seal between the joints. At Leaking Showers Sealed, we utilise Ardex EG15 epoxy grout, which is non-porous and prevents water and mould from penetrating like traditional cement grout.

Over time, grout deteriorates due to exposure to hot water, cleaning chemicals, and slight structural movements. This deterioration leads to cracks and pinholes that permit water to seep through the joints, even if the tiles themselves appear unaffected. Often, this damage remains concealed as water accumulates behind the tiles and beneath the shower floor.

Regrouting reinstates the integrity of these joints, making the shower watertight once again. It also eliminates unsightly stained grout lines that can make an otherwise clean bathroom look aged, all without the cost and disruption of a full renovation.

Will Regrouting My Shower Resolve the Leaks?

Regrouting effectively addresses leaks when water escapes through compromised grout or silicone, which are common culprits of shower leaks. The first step is to identify the source of the water to assess if regrouting is the right solution.

When Is Regrouting and Resealing the Appropriate Solution?

Regrouting and resealing is the optimal choice when you notice cracked, crumbling, or missing grout, or mould that reappears after cleaning. It is also effective if the silicone around corners and the shower base has split or detached. In these scenarios, the tiles remain intact, and the water is leaking through the joints.

When Should You Consult a Plumber Instead of Regrouting?

If the leak originates from a pipe within the wall, the shower drain, or a tap, regrouting will not remedy the situation. We collaborate with plumbers, and if our inspection reveals an issue with a pipe, drain, or tap, we will provide a detailed explanation and refer you to a plumber for further assistance.

What If the Waterproofing Membrane Beneath the Tiles Is Compromised?

A waterproofing membrane is situated behind the tiles and underneath the shower floor. Prolonged exposure to water through the grout can damage this membrane. Replacing a failing membrane necessitates tile removal, categorising it as renovation work that we do not handle.

Andreas, who holds NSW licence 89111C, is an expert in waterproofing. Our team is trained to identify a compromised membrane. If we discover during our inspection that your shower requires more than just a regrout, we will inform you before commencing any work.

Addressing the issue at the first signs of trouble is vital to protecting the membrane. New epoxy grout and silicone form a barrier against water, making it essential to tackle cracked grout before further damage occurs.

How to Recognise the Need for Shower Regrouting

Be on the lookout for the following signs that indicate your shower may be leaking through the grout and silicone:

• Cracked, loose, or missing grout between the tiles
• Mould that quickly reappears after cleaning
• Damp odours or visible moisture damage near the shower
• Water pooling outside the shower or leaking into adjoining areas
• Bubbling paint, discoloured walls, or soft floorboards
• Tiles that feel loose or sound hollow when tapped

If you notice any of these symptoms, it’s likely that the grout and silicone are no longer effectively holding water within the shower. Tiles that sound hollow when tapped, known as drummy tiles, may need refixing before the shower can be resealed, and we check for these during our inspection.

What to Expect During the Regrouting Process with Leaking Showers Sealed

The regrouting process at Leaking Showers Sealed comprises five essential steps, ensuring that your tiles remain undisturbed throughout.

Step 1: Inspecting the Shower and Diagnosing the Leak

We conduct a thorough inspection of the grout, silicone, tiles, and surrounding areas to identify where the water is escaping. If our inspection indicates a problem with a pipe, drain, or tap, we will inform you before scheduling any regrouting.

Step 2: Removing Old Grout and Silicone

We carefully cut out the old grout and remove all existing silicone, including any layers applied over previous silicone. New grout cannot bond properly to old grout, making it crucial to start with a clean surface.

Step 3: Thoroughly Cleaning the Tiles and Exposed Joints

We ensure the tiles and empty joints are meticulously cleaned to eliminate soap scum, dust, and mould, guaranteeing that the new grout adheres effectively to a pristine surface.

Step 4: Applying Epoxy Grout to Regrout the Shower

We fill the joints with Ardex EG15 epoxy grout. For a shower base seal, we regrout the shower floor, the junction between the floor and wall, and the perimeter. For a complete shower seal, we also regrout every wall grout line.

Step 5: Resealing Corners, Junctions, and Tap Flanges

We apply Ardex ST neutral cure silicone to reseal internal corners and junctions. For a complete shower seal, we ensure that the tap flanges are also sealed.

Typically, sealing the shower base takes about 3 to 4 hours to complete, while a full shower seal for both walls and floor generally requires 4 to 5 hours. It’s essential to wait at least 24 hours before using the shower again to allow the grout and silicone to cure properly.

Can Regrouting Eliminate Shower Mould?

Regrouting effectively removes mould that has infiltrated the grout, as the mouldy grout is replaced. Surface cleaning with bleach or mould sprays only addresses the top layer, allowing mould to return since it resides within the grout where water gets trapped. For more information on why shower grout becomes stained and damaged, please refer to our guide.

Can Regrouting Help You Avoid a Complete Bathroom Renovation?

For many homeowners, regrouting presents a practical solution to delay or evade a comprehensive bathroom renovation. If the tiles are in good condition and the leak can be traced to the grout and silicone, a regrout and reseal will restore the shower’s watertight integrity. This approach also allows you more time to save for a future renovation.

A regrout, reseal, and thorough clean can also serve as an effective refresh before listing a home for sale or for landlords between tenant occupancies. Our article on regrouting a shower as a cost-effective renovation illustrates how significantly a regrout can enhance a bathroom’s appearance.

Is DIY Regrouting a Shower a Practical Choice?

While DIY grout kits are readily available at hardware stores, regrouting a shower correctly is more complex than it seems. Without the right tools and expertise, you risk:

• Damaging or cracking tiles during the removal of old grout
• Leaving remnants of old grout in the joints, which prevents a proper bond for the new grout
• Overlooking silicone joints, which are frequent sources of leaks
• Failing to identify a leak from a pipe or a compromised membrane

If you are unsure about the source of the water, it’s wise to have the shower inspected before purchasing a DIY kit.

What Is the Cost of Shower Regrouting?

The cost of regrouting a shower varies based on several factors:

• Tile size, as smaller mosaics and 100mm tiles have more grout lines compared to larger 300mm or 600mm tiles
• The dimensions and layout of the shower, including features such as double showers, niches, and additional corners
• The condition of the grout and silicone, including issues like extensive mould, silicone layered over old silicone, or previous repairs needing removal
• Drummy or loose tiles that require refixing prior to resealing the shower

Regrouting is significantly more cost-effective than a full bathroom renovation or retiling. For a cost estimate, please send photos of the shower floor, walls, and the complete shower to sales@leakingshowerssealed.com.au, or call 1300 815 512.

Common Questions About Shower Regrouting

How long does it take to regrout a shower?
A shower base seal typically requires around 3 to 4 hours on site, while a complete shower seal for both walls and floor takes about 4 to 5 hours. Please allow at least 24 hours before using the shower again.

Will regrouting stop a leak?
Yes, if the leak is due to damaged grout or silicone. Regrouting will not resolve leaks from a pipe, drain, or tap, which require a plumber, nor will it address a failed membrane, which necessitates tile removal.

How often should a shower be regrouted?
The frequency of regrouting depends on the type of grout used, the bathroom’s ventilation, and the cleaning practices employed. Signs that indicate the need for regrouting include cracked grout, recurring mould, and persistent damp odours. Our article on how long shower regrouting lasts explains the factors that influence this.

Can you apply new grout over old grout?
No. New grout applied over existing grout will not bond properly and will not fix the leak. It is essential to remove all old grout before regrouting the shower.

Is regrouting covered by warranty?
Yes. A regrout and reseal includes a 10-year warranty on Ardex products and a 7-year workmanship warranty from Leaking Showers Sealed, contingent upon a site assessment.

Why Trust Leaking Showers Sealed for Your Shower Regrouting Requirements?

• Since 2016, we have specialised in regrouting and resealing showers without the need to remove tiles.
• We use Ardex EG15 epoxy grout and Ardex ST neutral cure silicone for exceptional results.
• Every regrout and reseal is supported by a 10-year warranty on Ardex products and a 7-year workmanship warranty, subject to site assessment.
• We boast over 300 Google reviews across our three locations.
• Our services encompass regrouting and resealing showers throughout North Richmond, the Hills District, and the North Shore of Sydney.

If your shower is leaking, do not delay in addressing the potential damage occurring behind the tiles. Send us photos of your shower or contact us to schedule an inspection. We will evaluate whether a regrout and reseal can effectively stop the leak.