Ducted Heating Installation: Options to Consider

Installing ducted heating involves setting up a central unit that efficiently distributes either warm or cool air throughout your home via ducts located in the ceiling or beneath the floor. Each room receives air through strategically positioned vents, while temperature control is managed via a wall-mounted controller, providing whole-house climate management. In Melbourne, many homeowners prefer electric reverse cycle ducted heating, a system that effectively delivers heating during winter and cooling in summer through the same vents. Gas ducted heating remains an option, and this guide offers a comprehensive comparison of both systems.

This guide provides an in-depth overview of the ducted heating installation process, covering crucial elements such as system sizing, zoning, ductwork, the outdoor unit, and what to expect on installation day. We will also examine the operating costs associated with gas systems, the Victorian Energy Upgrades (VEU) rebate applicable to the shift towards electric systems, and essential questions to ask any potential installer before finalising your decision.

Essential Insights on Ducted Heating Installation

• According to energy.gov.au, reverse cycle air conditioners boast efficiency ratings ranging from 300% to 600%.
• Energy.gov.au also indicates that ducted reverse cycle systems operate more cost-effectively compared to gas heating systems.
• Most installations can usually be completed within a single day, although larger homes or complex duct layouts may require a second day.
• The VEU rebate applies when superseding an old gas heater with a qualifying reverse cycle system.

What Types of Ducted Heating Solutions Can You Choose for Your Home?

In Melbourne, homeowners can choose between two primary types of ducted heating systems, with the option to add cooling to an existing gas system.

• <a href="https://writebuff.com/air-conditioner-summer-ready-6-signs-you-must-check/">Electric Reverse Cycle Ducted Heating and Cooling.</a> This system consists of both an outdoor and an indoor unit, working together to heat or cool your entire home through a single set of vents. This is the most commonly installed system, with additional details available on our ducted reverse cycle air conditioning page.
• Gas Ducted Heating. A gas furnace generates warm air, which a fan circulates through the ducts. While gas ducted heating installations still take place, many Melbourne homeowners are opting to transition away from gas rather than installing new gas heaters.
• Add-on Cooling for an Existing Gas Heater. If your gas ducted heater is relatively modern, an add-on cooling system can be integrated, utilising the same ducts and controller for cooling purposes.

If your gas heater is aging and requiring frequent repairs or resulting in high operating costs, consider upgrading to an electric reverse cycle ducted system. This option provides both heating and cooling in a single installation. Our detailed guide on transitioning from gas ducted heating to electric heating offers further insights on this upgrade.

How Does Reverse Cycle Ducted Heating Function?

Reverse cycle ducted heating operates by transferring heat instead of generating it. The Australian Government’s energy.gov.au heating and cooling guide clarifies that reverse cycle air conditioners can convert one unit of electrical energy into three to six times more heating or cooling energy, achieving efficiency ratings of between 300% and 600%. In contrast, an electric bar heater converts one unit of electricity into a single unit of heat.

During winter, the outdoor unit extracts heat from the surrounding air and transfers it indoors through refrigerant pipes. The indoor unit, located in the roof space or under the floor, distributes this warm air through the ducts to each vent. In summer, the process reverses, allowing the same system to cool your home. For a thorough explanation of how a refrigerated reverse cycle system operates, please refer to our article detailing each component.

How Is Your Ducted Heating System Accurately Sized?

Proper sizing is crucial to ensure that a ducted heating system functions effectively during the chilly mornings in Melbourne. An undersized system struggles to warm distant rooms, while an oversized system incurs unnecessary operational costs. Energy.gov.au recommends selecting a model with the appropriate capacity for your home and consulting experts before making significant purchases like ducted heating and cooling.

During our home assessment, we evaluate the number of rooms and vents, the duct routing (whether through the ceiling or beneath the floor), whether your home is single or multi-storey, and the intended use of each room. Providing house plans can assist us in determining duct runs prior to our visit. For comprehensive guidance on sizing a ducted heating system customised for your Melbourne home, refer to our sizing guide.

Is Zoning an Important Feature for Your New Ducted Heating System?

Zoning functionality allows you to control which rooms receive heating. For example, you may want to keep bedrooms unheated during the day and living areas unheated at night, rather than heating the entire house simultaneously. If your previous gas ducted heater lacked zoning, it is beneficial to install a zoned system during the new installation, as it streamlines the configuration process.

Thermostat settings are also vital. Energy.gov.au states that increasing heating by each degree in winter can raise your energy consumption by 5% to 10%. Most systems we install can be controlled via mobile applications, enabling you to activate the heating before returning home from work, ensuring a comfortable environment upon your arrival without needing to run the system continuously throughout the day.

What Changes Occur to Ductwork and Vents During Installation?

New ducting is installed with every system installation. Existing ducting from an old gas heater usually cannot accommodate a reverse cycle system and is typically filled with dust from years of use. The new ducting is appropriately sized for both heating and cooling, connecting to the same outlet points in your ceiling or floor, resulting in new vents and grilles rather than patched openings from the previous system.

For ceiling installations, we access the roof space by removing tiles or sheets, dismantling the old unit and ducts, and fitting the new system and ductwork in their place. Approximately one-third of the homes we encounter have floor ducting, where the indoor unit is installed in the subfloor, requiring careful handling due to limited access.

Where Should the Outdoor Unit Be Located for Optimal Performance?

A reverse cycle ducted system consists of both an outdoor and an indoor unit, connected through pipes that transport refrigerant. The outdoor unit is positioned outside the house. We discuss its placement with you during the in-home assessment, and if your property presents challenges, we identify the most suitable location ahead of the installation day.

What Is the Typical Duration for Ducted Heating Installation?

Most ducted heating installations are completed within a single day. Larger homes or more intricate duct layouts may extend the installation to a second day. We confirm the expected duration during our assessment, ensuring you are informed about what to expect before work commences.

On installation day, our team removes the old heater, installs the new ducting and vents, sets up both the indoor and outdoor units, and connects the controller. As licensed mechanical plumbers, we can also cap the gas line of the old heater during the installation, eliminating the need for a separate tradesperson. If you continue to use gas for hot water or cooking, those connections will remain intact. Before we conclude our visit, we ensure that the new system operates correctly and provide instructions on using the controls.

For extensive information on what to expect on installation day, refer to our article detailing the heating and cooling installation process.

How Do the Ongoing Costs of Ducted Reverse Cycle Heating Compare to Gas Ducted Heating?

As noted by Energy.gov.au, the operating costs for ducted gas heating can be significant due to high gas consumption and the electricity required for the fans. Conversely, ducted reverse cycle systems are generally seen as more cost-effective than gas heating. Ducted systems often operate less efficiently than wall-mounted units, primarily due to larger fans and energy loss through ductwork, making proper sizing and duct design essential.

Your ongoing costs will depend on your home’s size, insulation quality, zoning use, and whether you have solar panels installed. A reverse cycle system can utilise your solar power during daylight hours, a benefit not available with gas heating. Our comparison of ducted gas and reverse cycle heating for Melbourne homes provides a detailed analysis of running cost figures.

How Does the VEU Rebate Apply When Moving from Gas Ducted Heating?

The Victorian Energy Upgrades (VEU) programme incentivises households that transition from gas heating to an efficient electric system. The rebate is applicable when an existing gas heating appliance is removed and replaced with a qualifying premium inverter reverse cycle system. Generally, if a home has never had gas heating, the rebate will not apply.

We manage all VEU paperwork during the installation process, and the rebate is deducted from your payment at the point of sale, removing the need for you to fill out forms or wait for a refund. Our article on the VEU rebate clarifies the eligibility criteria and coverage details.

What Important Questions Should You Consider Before Accepting a Ducted Heating Installation Quote?

Ducted heating quotes can be complex to compare, as one quote may include elements that another omits. Use these questions to assess quotes effectively:

• Is the quoted price all-inclusive, with the VEU rebate already factored in?
• Does the quote cover new ducting and vents, or does it propose reusing existing ducts?
• Was the system sized based on an in-home assessment or merely through a phone consultation?
• Is zoning included, and how many zones does the quote accommodate?
• Who will take responsibility for removing the old gas heater and capping the gas line?
• Will the installation be executed by the installer’s own team or subcontracted out?
• What workmanship guarantee accompanies the installation?

Select Beyond Heating and Cooling for Reliable Ducted Heating Installation in Melbourne’s Northern Suburbs

Beyond Heating and Cooling specialises in the expert installation of ducted heating and cooling systems across Melbourne’s northern and northeastern suburbs. Our team comprises qualified refrigeration mechanics and mechanical plumbers with expertise in both refrigerant and gas systems. We hold an ARC refrigerant handling licence (L073783), ensuring that all installations are conducted by our licensed team, not subcontractors. We provide a strong workmanship guarantee for our services.

Each quote begins with a complimentary in-home assessment. We evaluate your current heating system, ducts, and home layout, discuss the most suitable system options, and provide a quote that includes the VEU rebate where applicable. We collaborate with a wide range of leading heating and cooling brands to recommend the best system tailored to your needs.

If you are considering the installation of new ducted heating, call us at 1800 239 663 or request a quote online. Adam or another team member will be happy to assist you in exploring your home’s options. You can also view our complete range of ducted heating and cooling installations.